 | |  | |  | |  | |  | |  | |  | |  | |  | |  | |  | |  | |  | |  |
This could come after the "News Media". Let's take the so-called pain reliever "medicine". Although "Aspirin" was pretty much established because of the long tech. name,
such as Sodium Chloride is referred to as Salt, "Tynenol" is a BRAND name of acetaminophen. Also, "Extra Strength" is just a larger pill.
such as Sodium Chloride is referred to as Salt, "Tynenol" is a BRAND name of acetaminophen. Also, "Extra Strength" is just a larger pill.
| Language |
Let's start whith the letter (1). Now let's picture a cave man wanting to communicate whith his friend that he wants only (1) object. So he picks up a trig and struts it
out, waving it about, and grunts "un", then picks up a rock and repeats. Then he thinks, wait, there's another stone nearby, so he picks up both and commits a
sound like "do". The language then progress's much the same as of today. But wait, now inters the Brithish/English arrogance. In there egotism, they decided to
change all the names and city's of the then know world, such as calling the capital of France " Paris" instead of Paree, plus pronouncing the letter (1) as won, when
it should be oonaa. Okay, now let's start whith some of the most popular "news media" words. I used to "hang " Sheetrock, that is, installing wallboard. To cut the
board, one cuts the brown side whith a utility "knife, not an "box cutter. There is no such thing as a "box cutter". Cutter can only be used as a verb. Now what
about "foreigner". If you live in the very north of the U.S. and your brother lives right across the boarder in Canada, would you call him a Foreigner? The word
foreign means "unknown". Now here's a good won, "Terrorist". Franklin D. Roosevelt said, "There is nothing to fear but fear Itself". There are stupid/ignorant
people who will go crazy whith "fear" about a harmless honey bee. (I can elaborate on this as I raised bees and was allergic to there poison, for awhile).
(Take two Aspirins water with) What? Whith what? With water.
out, waving it about, and grunts "un", then picks up a rock and repeats. Then he thinks, wait, there's another stone nearby, so he picks up both and commits a
sound like "do". The language then progress's much the same as of today. But wait, now inters the Brithish/English arrogance. In there egotism, they decided to
change all the names and city's of the then know world, such as calling the capital of France " Paris" instead of Paree, plus pronouncing the letter (1) as won, when
it should be oonaa. Okay, now let's start whith some of the most popular "news media" words. I used to "hang " Sheetrock, that is, installing wallboard. To cut the
board, one cuts the brown side whith a utility "knife, not an "box cutter. There is no such thing as a "box cutter". Cutter can only be used as a verb. Now what
about "foreigner". If you live in the very north of the U.S. and your brother lives right across the boarder in Canada, would you call him a Foreigner? The word
foreign means "unknown". Now here's a good won, "Terrorist". Franklin D. Roosevelt said, "There is nothing to fear but fear Itself". There are stupid/ignorant
people who will go crazy whith "fear" about a harmless honey bee. (I can elaborate on this as I raised bees and was allergic to there poison, for awhile).
(Take two Aspirins water with) What? Whith what? With water.
Aotomobile
Automobile
Prolog:
Because of the miss use, misunderstanding, misinterpretations and translations, I have decided to write the anatomy (namacultal?) of a typical 1949 car.
You see, every part of/in a car serves a purpose and is so named for the job it does. (no politics, predigests , etc.)
I don‘t expect to be perfect and will probably leave out some things, but will continue to up-date.
Whith which to start; the bumper “bumps” any foreign object, to protect the chais, to which the whole car is built. Then the Grill that protects the Radiator, which “radiates” the heat from the
water. The Fan, which forces air through the Radiator, the Fan Belt, which turns the fan. The Fan Belt is driven via a “pulley which is attached to the Crankshaft, which is so called because
one had to “Crank” the engine in order to start said. Then the Water Pump, which “pumps the hot water trough the engine, the flow of water controlled by a Thermostat, so called because
Thermal-(heat) and (stat)-“Status”. The Pistons are attached at equal spaces to the Crankshaft via Barings, which means “to Bear upon”. The Pistons have Rings, that circle the Pistons to
prevent the escape of pressure when the fuel is exploded by the Spark plugs, so named because there is a spark created by a gap at the end of the plugs which is generated by the Generator
then connected to a Coil, to boost the charge, then to a Compactor, which stores and builds the charge via holding the charge between the opening of the Points which in turn are attached to
the Distributor, which “Distributes” the charges, connected to the Rotor, so called because it rotates which is driven by the Cam Shaft which operates the Values, so called because they
control the openings to allow the Fuel in exhaust out, and are closed when the Piston is on top of the Cylinder’s called because it is a hole in which the Piston rides up and down and when the
Fuel is shot into the cylinder via the opening of a valve. The fuel is in the Manifold coming from the Carburetor, so named because of the type of fuel (carbohydrate-“fossil fuel”). Gasoline will
not burn by it’s self. It must vaporize, via Jets that squirt fuel into the manifold and is mixed in correct proportions with oxygen (air). To start the Engine the Crankshaft is “cranked or turned via
a starter so named because it starts the engine. (No kidding). The starter is powered by the electricity via the Battery. the starter has to engage into the Flywheel, so named because the
wheel flies at top speed therefore capturing motion( Energy) and also “irons” out the strokes from the individual Pistons.
The starter is forced into the Flywheel by a Syinord, so called because it connects, then “kicked out via an “Bendex”, (I think brand name). Now the motion of the motor is transferred to the
Transmission, so called because it “transmits” the motion to the Drive shaft, so called because it “drives” the vehicle. The Transmission is connected to the Flywheel via a Clutch, so-called
because it ‘clutches” the Fly well. The Drive shaft has two, (one on each end), Universals, so called as they can turn on any angle so that when the Drive Train moves because of the motion of
the vehicle ,it can spin without breaking. The Driveshaft is connected to the Differential, meaning that “difference” between one axle and the other, which connects to the wheels, so that when
the vehicle turns, one wheel can turn faster/slower in proportion. More to come--- ie “Head”etc.
Hood, Bonnet in England, covers the motor. Trunk, so called because in the cars that were first were made, a “Trunk” was attached in the back of the driver’s seat.
Automobile
Prolog:
Because of the miss use, misunderstanding, misinterpretations and translations, I have decided to write the anatomy (namacultal?) of a typical 1949 car.
You see, every part of/in a car serves a purpose and is so named for the job it does. (no politics, predigests , etc.)
I don‘t expect to be perfect and will probably leave out some things, but will continue to up-date.
Whith which to start; the bumper “bumps” any foreign object, to protect the chais, to which the whole car is built. Then the Grill that protects the Radiator, which “radiates” the heat from the
water. The Fan, which forces air through the Radiator, the Fan Belt, which turns the fan. The Fan Belt is driven via a “pulley which is attached to the Crankshaft, which is so called because
one had to “Crank” the engine in order to start said. Then the Water Pump, which “pumps the hot water trough the engine, the flow of water controlled by a Thermostat, so called because
Thermal-(heat) and (stat)-“Status”. The Pistons are attached at equal spaces to the Crankshaft via Barings, which means “to Bear upon”. The Pistons have Rings, that circle the Pistons to
prevent the escape of pressure when the fuel is exploded by the Spark plugs, so named because there is a spark created by a gap at the end of the plugs which is generated by the Generator
then connected to a Coil, to boost the charge, then to a Compactor, which stores and builds the charge via holding the charge between the opening of the Points which in turn are attached to
the Distributor, which “Distributes” the charges, connected to the Rotor, so called because it rotates which is driven by the Cam Shaft which operates the Values, so called because they
control the openings to allow the Fuel in exhaust out, and are closed when the Piston is on top of the Cylinder’s called because it is a hole in which the Piston rides up and down and when the
Fuel is shot into the cylinder via the opening of a valve. The fuel is in the Manifold coming from the Carburetor, so named because of the type of fuel (carbohydrate-“fossil fuel”). Gasoline will
not burn by it’s self. It must vaporize, via Jets that squirt fuel into the manifold and is mixed in correct proportions with oxygen (air). To start the Engine the Crankshaft is “cranked or turned via
a starter so named because it starts the engine. (No kidding). The starter is powered by the electricity via the Battery. the starter has to engage into the Flywheel, so named because the
wheel flies at top speed therefore capturing motion( Energy) and also “irons” out the strokes from the individual Pistons.
The starter is forced into the Flywheel by a Syinord, so called because it connects, then “kicked out via an “Bendex”, (I think brand name). Now the motion of the motor is transferred to the
Transmission, so called because it “transmits” the motion to the Drive shaft, so called because it “drives” the vehicle. The Transmission is connected to the Flywheel via a Clutch, so-called
because it ‘clutches” the Fly well. The Drive shaft has two, (one on each end), Universals, so called as they can turn on any angle so that when the Drive Train moves because of the motion of
the vehicle ,it can spin without breaking. The Driveshaft is connected to the Differential, meaning that “difference” between one axle and the other, which connects to the wheels, so that when
the vehicle turns, one wheel can turn faster/slower in proportion. More to come--- ie “Head”etc.
Hood, Bonnet in England, covers the motor. Trunk, so called because in the cars that were first were made, a “Trunk” was attached in the back of the driver’s seat.
There are some nouns,modern tools and such, that have been integrated into the English language trough brand names and jobs that they perfume such as, "channel
Locks", "crescent" wench, "stilltion", "Skill Saw" etc., which is okay. How about the monitor to which you are looking, "desktop" or the tool that you use to move things
around, looks like a "mouse". (Also, microphone, which is derived from the word "micro", meaning small and phone.) Which to what I really object is words like "foreigner",
"terrorist", American "Indian", "health care" and so forth. Another news media word is "Baby Boomer" which really pisses me off. What the heck is a "Boomer"? I would
like to boom the "news media", mater of fact, it would not hurt my feelings if the "news Media" was "blwned" up.
Locks", "crescent" wench, "stilltion", "Skill Saw" etc., which is okay. How about the monitor to which you are looking, "desktop" or the tool that you use to move things
around, looks like a "mouse". (Also, microphone, which is derived from the word "micro", meaning small and phone.) Which to what I really object is words like "foreigner",
"terrorist", American "Indian", "health care" and so forth. Another news media word is "Baby Boomer" which really pisses me off. What the heck is a "Boomer"? I would
like to boom the "news media", mater of fact, it would not hurt my feelings if the "news Media" was "blwned" up.
 | |  | |  | |  | |  | |  | |  | |  | |  | |  | |  | |  | |  | |  | |  |
| Yes I know that this is poorly written, but wanted to get the idea across. I will add and edit later. (For all you self appointed arrogant, egotistical?, so-called "writers/editors". |
Notice: Unable to check spelling,
did not check before publishing.
Sorry, the dummy relies on the
"spell check"! Nomenclature.
did not check before publishing.
Sorry, the dummy relies on the
"spell check"! Nomenclature.
Components of "Wheels": Axle, coming from the word "axis". "A pair of wheels attached to an Axle. The axle is attached to the body (chassis) by a bearing. A "drum" is
then bolted on the axle. Inside the "drum" are break "shoes", which will expand against the inside walls of the drum to stop motion. This is done via pressure omitted by
hydraulic action from the break 'cylinder'. The tire is attached to the wheel, which in turn is attached to the "drum". The break cylinder is composed of "plungers" that
expand against the "shoes" which force the shoes to contact the "drum". The break shoe lining is attracted to the shoe via Rivets. When the lining wears out, the Rivets
gouge the drum causing it to shatter. Then down comes baby and cradle and all. So "Maintenance" will keep you alive, not "faith". Remember, every thing is "realative"!
then bolted on the axle. Inside the "drum" are break "shoes", which will expand against the inside walls of the drum to stop motion. This is done via pressure omitted by
hydraulic action from the break 'cylinder'. The tire is attached to the wheel, which in turn is attached to the "drum". The break cylinder is composed of "plungers" that
expand against the "shoes" which force the shoes to contact the "drum". The break shoe lining is attracted to the shoe via Rivets. When the lining wears out, the Rivets
gouge the drum causing it to shatter. Then down comes baby and cradle and all. So "Maintenance" will keep you alive, not "faith". Remember, every thing is "realative"!